KRPLUS TDS Meter for Water testing bets quality, Total dissolved solids (tds) Meter, Water tds meter digital, Water testing Meter, TDS Meter for water testing, pen type LCD tds digital – Beige

₹999.00 ₹199.00. 18

• Once the meter is on, the temperature function can be used, in or out of liquid. 2. Press the TEMP button. The display will switch to temperature (in Celsius only). 3. To return to TDS mode, press the TEMP button.
  Precautions 1. The meter is Pre-calibrated. Do not dip the meter beyond the water level limit. 2. Do not store the meter in high temperatures or direct sunlight. 3. Do not attempt to open the housing or tinker with the electronics of the unit.
• You can also measure Input and Output TDS of the water purifiers and filters.Important….to check TDS of output water of RO Water Purifier, As using it you will be able to find out how effective water purifier is or does it need any part replacement
• Auto-off function which turns it off after 10 minutes of inactivity. Highly Efficient and Accurate product;
• Package Contains: 1 TDS Meter,

How to Recallibrate your TDS

• 1. Immerse the TDS meter into calibration solution up to maximum immersion level (2 inch).
• 2. Reading appear on the display.
• 3. If the meter does not read within 2% of solution. Press ‘temp’ key for 3 seconds, display start blinking. Adjust the reading by using ‘hold’ key (to increase the reading) and ‘On/Off’ key (to decrease the reading).
• 4. Press ‘temp’ key again for 3 seconds, meter enters in testing mode. Take the TDS meter out from water.Shut it Down. Wait a moment,Turn it on, after showing zero put the meter again into water. TDS meter will show new readings.
• 5. If reading is accurate calibration is completed. If not, repeat the procedure.